Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: notesnews 0.1 (unido 12/05/84); site unido.UUCP Path: utzoo!linus!philabs!cmcl2!seismo!mcvax!unido!vr0z05 From: vr0z05@unido.UUCP Newsgroups: net.micro.apple Subject: Interrupts in TURBO on Apple Message-ID: Date: Fri, 31-May-85 16:43:00 EDT Article-I.D.: unido.nf15600004 Posted: Fri May 31 16:43:00 1985 Date-Received: Mon, 3-Jun-85 00:29:12 EDT Sender: notes@unido.UUCP Lines: 27 Nf-ID: #N:unido:15600004:000:748 Nf-From: unido!vr0z05 May 31 18:43:00 1985 Hi folks, I have a question on Turb-Pascal. Has anybody out there tried to write interrupt procedures in Turbo-Pascal on CP/M 2.23 on an Apple II+ with a Microsoft Softcard. Has anybody tried to write interrupt procedures on the same configuration in assembler. I have tried it, but the documentation seems to be not always correct in the parts about machine-level and interrupt programming, so my program doesn't work correct. I'm interested in any help how to catch the interrupts on both processors (6502 - Apple / Z80 - MS-Softcard) correct. Thanks in advance Uwe Hoch Computer Science Department University of Dortmund 4600 Dortmund 50 P.O. Box 500500 West Germany E-mail address UUCP: ...!mcvax!unido!vr0z05