Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site ttidcb.UUCP
Path: utzoo!linus!philabs!ttidca!ttidcb!jackson
From: jackson@ttidcb.UUCP (Dick Jackson)
Newsgroups: net.micro.atari
Subject: Print Shop via ATR8000 - S/W by Mail
Message-ID: <368@ttidcb.UUCP>
Date: Tue, 28-May-85 12:16:54 EDT
Article-I.D.: ttidcb.368
Posted: Tue May 28 12:16:54 1985
Date-Received: Thu, 30-May-85 06:30:01 EDT
Organization: TTI, Santa Monica, CA.
Lines: 17




My thanks to those who replied with positive recommendations re. using
the Print Shop package with the ATR8000. I called Broderbund again and
they still believed it would not work, however I was assured that if I
bought it direct from them they would refund on failure. (Incidentally
I have so far always had good experiences with ordering software by mail.)
Anyway I did order it, the Print Shop arrived in four days, works fine with
the ATR8000 and does good stuff.

Once again I feel bound to ackowledge the Broderbund technical support
people for their uncomon honesty, if not their accuracy.

Software specialist: "It's a hardware problem."
Hardware specialist: "It's a software problem."
Salesman: "There is no problem".