Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!linus!decvax!decwrl!greipa!pesnta!hplabs!hao!seismo!brl-tgr!tgr!W8SDZ@SIMTEL20.ARPA
From: W8SDZ@SIMTEL20.ARPA (Keith Petersen)
Newsgroups: net.micro.cpm
Subject: XLISP version 1.2 for CP/M-80 now available
Message-ID: <10920@brl-tgr.ARPA>
Date: Wed, 22-May-85 12:50:43 EDT
Article-I.D.: brl-tgr.10920
Posted: Wed May 22 12:50:43 1985
Date-Received: Sun, 26-May-85 20:59:49 EDT
Sender: news@brl-tgr.ARPA
Lines: 20


    RE: XLisp 1.4

    Is there a way to access this via non-arpa routes?  Via 300/1200
    baud lines using XMODEM protocol would be preferred.  I will be
    running it on a 68000 based UNIX-5b system.

    Thanks in advance,

    Cherry.pasa@Xerox.Arpa

I don't have XLISP 1.4, sorry.  XLISP 1.2 is available from my RCPM
Royal Oak (MI) system, (313) 759-6569.  It's on the D: drive there as
XLISP12.LBR.  You can use 300 or 1200 baud (103, 212 or Vadic 3400
protocol).

--Keith
Arpa:  W8SDZ@SIMTEL20.ARPA
uucp:  ...{decvax,unc,hao,cbosgd,seismo,aplvax,uci}!brl-bmd!w8sdz
uucp:  ...{ihnp4!cbosgd,cmcl2!esquire}!brl-bmd!w8sdz