Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site apr.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!cbosgd!osu-eddie!apr!gibaldi
From: gibaldi@apr.UUCP (Mark R. Gibaldi)
Newsgroups: net.micro.pc
Subject: Info on TEAC drives
Message-ID: <132@apr.UUCP>
Date: Sun, 26-May-85 11:26:10 EDT
Article-I.D.: apr.132
Posted: Sun May 26 11:26:10 1985
Date-Received: Thu, 30-May-85 04:18:39 EDT
Reply-To: gibaldi@apr.UUCP (Mark R. Gibaldi)
Organization: Advanced Programming Resources, Columbus OH
Lines: 12



I have just installed two TEAC half height floppy drives in my PC.  Before
doing so, I looked for any shipping screws or bolts but could not locate any.
However, upon trying to use the drives, although the drive lights work, the
actual drive motors do not engage and I get a Drive not ready error.

Does anybody out there know if in fact there are shipping screws in the drives.
If so, can you tell me their specific location.  Obviously I did not recieve
any good documentation with the drives.

Any help would be greatly appreciated.