Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/17/84 chuqui version 1.7 9/23/84; site cadtec.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!hao!hplabs!nsc!cadtec!lrolla
From: lrolla@cadtec.UUCP (Larry Rolla)
Newsgroups: net.rec.wood
Subject: Re: Bubbles in Varnish
Message-ID: <129@cadtec.UUCP>
Date: Thu, 30-May-85 09:46:56 EDT
Article-I.D.: cadtec.129
Posted: Thu May 30 09:46:56 1985
Date-Received: Sun, 2-Jun-85 20:23:58 EDT
References: <2335@decwrl.UUCP>
Reply-To: lrolla@cadtec.UUCP (Larry Rolla)
Organization: Cadtec Corp., San Jose CA
Lines: 8

While in high school woodworking we used to use a propane torch to remove
the bubbles from a polyurethane project. You keep the flame about 6 inches
away from the surface while moving it back and forth. I used to like this 
part of the project. :-)

I'm not sure that this will work with varnish but its worth a try.

LWR