Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: notesfiles - hp 1.2 08/01/83; site hp-pcd.UUCP
Path: utzoo!utcs!lsuc!pesnta!hplabs!hp-pcd!craig
From: craig@hp-pcd.UUCP (craig)
Newsgroups: net.audio
Subject: long interconnects question
Message-ID: <7400001@hpcvlo.UUCP>
Date: Wed, 5-Jun-85 11:43:00 EDT
Article-I.D.: hpcvlo.7400001
Posted: Wed Jun  5 11:43:00 1985
Date-Received: Mon, 10-Jun-85 12:50:12 EDT
Organization: Hewlett-Packard - Corvallis, OR
Lines: 11
Nf-ID: #N:hpcvlo:7400001:000:521
Nf-From: hpcvlo!craig    Jun  5 07:43:00 1985

I'd like to get a few opinions on long cable runs between preamp
and amp vs amp and speakers.  In my present system, I have about 30 ft 
of speaker cable and was thinking about replacing that with a simular length
of interconnect and putting the amp by the speakers.
Any forseen problems, advantages, disadvantages?  Whose interconnect should
I use?  
The system is reasonably high zoot (Perreaux) so I'd like as 
little signal loss/alteration as possible.

			Thanx, Craig Durland
			[hplabs|microsof|...] !hp-pcd!craig