Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 (Tek) 9/26/83; site teklabs.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!tektronix!tekcrl!teklabs!rafaeld
From: rafaeld@teklabs.UUCP (Rafael De Arce)
Newsgroups: net.auto
Subject: re: Honda Cam wear
Message-ID: <3093@teklabs.UUCP>
Date: Mon, 10-Jun-85 15:01:16 EDT
Article-I.D.: teklabs.3093
Posted: Mon Jun 10 15:01:16 1985
Date-Received: Wed, 12-Jun-85 07:10:21 EDT
Organization: Tektronix, Beaverton OR
Lines: 14


I own a 78 CVCC and have not experienced that problem but have heard about 
that problem before. 

I was told that Honda had a problem with the hardening process for that part
inparticular. It seems the cam was heated using an RF source to surface hard-
en the part and the process was failing ocasionally.

A friend of a friend took their car in and they replaced it but it took some 
haggling to get the dealership to admit to the flaw.

In your case, the warrenty may have expired.           

Good luck!