Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: notesfiles - hp 1.2 08/01/83; site hp-pcd.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!pesnta!hplabs!hp-pcd!dhk
From: dhk@hp-pcd.UUCP (dhk)
Newsgroups: net.cycle
Subject: Re: HELP - my gas tank leaks!
Message-ID: <65000016@hp-pcd.UUCP>
Date: Tue, 11-Jun-85 15:19:00 EDT
Article-I.D.: hp-pcd.65000016
Posted: Tue Jun 11 15:19:00 1985
Date-Received: Fri, 7-Jun-85 02:13:51 EDT
References: <279@ihlpa.UUCP>
Organization: Hewlett-Packard - Corvallis, OR
Lines: 26
Nf-ID: #R:ihlpa:-27900:hp-pcd:65000016:000:1009
Nf-From: hp-pcd!dhk    Jun  4 11:19:00 1985

Tried to mail this but...


   ----- Unsent message follows -----
Date: Tue, 4 Jun 85 11:06:04 pdt
From: Dustin Kassman <dhk>
Subject: Re: Gas tank leak
To: ihnp4!ihlpa!dob

Daniel,

Do not know if this will help but you might give it a try.  When I worked for 
a service station we used some stuff called Seal All Glue in a yellow and red
tube to seal gas leaks.  Many times the gas would be running out of the bottom
of the tank and all we would do is clean the area around the hole, rough it up
a little, and put the glue on.  Usually we would coat a piece of cloth with
the glue and stick that on the tank to make a better patch.  My 1965 Chevy ran
for years with a patch like that.  You should be able to find Seal All Glue at
most any hardware store.  I have a tube at home if you need toknow who makes
it.  Good luck.

Dustin Kassman
!hplabs!hp-pcd!dhk

PS.  The glue dries clear so if you tank is empty and dry you should be able 
to patch the holes so the glue hardly shows (ie. without the cloth).