Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site ecsvax.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!whuxlm!harpo!decvax!mcnc!ecsvax!cjl
From: cjl@ecsvax.UUCP (Charles Lord)
Newsgroups: net.micro,net.micro.apple
Subject: Re: EPROM Programmmers
Message-ID: <1472@ecsvax.UUCP>
Date: Thu, 13-Jun-85 23:22:51 EDT
Article-I.D.: ecsvax.1472
Posted: Thu Jun 13 23:22:51 1985
Date-Received: Sat, 15-Jun-85 09:00:41 EDT
References: <185@ski.UUCP>
Organization: NC Educational Computing Service
Lines: 12
Xref: watmath net.micro:10776 net.micro.apple:1972


One unit not mentioned before: the Apparat Prom Blaster.
It plugs into an empty slot (If you HAVE one) and reads/writes
2708/2716/2516/2532/2732/68764/2816. If you don't need large
EPROMs programmed, at $110. it's not bad. I have used mine
for four years now, and have even burned 27C16s and 27C32s
with over 90% sucess. Apparat makes a new on for the IBM PC
that goes on up through the 28 pin devices (27256 etc) for
around $130.

Charles Lord
cjl@ecsvax.UUCP