Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!watmath!clyde!bonnie!akgua!mcnc!philabs!cmcl2!seismo!brl-tgr!abc
From: abc@brl-tgr.ARPA (Brint Cooper )
Newsgroups: net.micro.apple
Subject: Print Shop Configuration
Message-ID: <11265@brl-tgr.ARPA>
Date: Sun, 9-Jun-85 22:29:05 EDT
Article-I.D.: brl-tgr.11265
Posted: Sun Jun  9 22:29:05 1985
Date-Received: Sun, 16-Jun-85 01:20:01 EDT
Distribution: net
Organization: Ballistic Research Lab
Lines: 30

I'm trying to makePrint Shop work with an Apple IIe with 2
drives, the Perisoft Messenger printer card, and an Okidata
Microline 82A Printer.  

The set-ups in the program do not mention this printer.  When
I tried the Oki 92 printer, the configuration failed the
built-in printer test.  Experimenting around, I found that
telling the program I have an Okidata Printer card with
graphics turned on works--sort-of.  

It passes the printer system test.   However, in every graphic
which it prints every other line is blank:  apparently an
extra linefeed is inserted at the end of every line.  

The printer does NOT insert linefeeds. 

How can I correct this problem?  Is there another "magic"
configuration that will work correctly?

Brint
	 ARPA:  abc@brl.arpa
	 UUCP:  ...{decvax,cbosgd}!brl-bmd!abc

		  Dr Brinton Cooper
		  U.S. Army Ballistic Research Laboratory
		  Attn: AMXBR-SECAD (Cooper)
		  Aberdeen Proving Ground, MD  21005-5066

Offc:    301 278-6883    AV:  298-6883     FTS: 939-6883
Home:	 301-879-8927