Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site nsc-pdc.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!mtuxo!mtunh!mtx5d!hou5e!mtunf!ariel!vax135!cornell!uw-beaver!tektronix!reed!nsc-pdc!rgb
From: rgb@nsc-pdc.UUCP (Robert Bond)
Newsgroups: net.micro.atari
Subject: Re: Chameleon Terminal Emulator
Message-ID: <211@nsc-pdc.UUCP>
Date: Tue, 18-Jun-85 13:54:13 EDT
Article-I.D.: nsc-pdc.211
Posted: Tue Jun 18 13:54:13 1985
Date-Received: Thu, 20-Jun-85 09:01:35 EDT
References: <8783@ritcv.UUCP>
Reply-To: rgb@nsc-pdc.UUCP (Robert Bond)
Distribution: net
Organization: NSC Portland, Orygun
Lines: 14
Summary: 

In article <8783@ritcv.UUCP> jjv3345@ritcv.UUCP writes:
>I can't get ANY of the terminal emulation modes to work with U*IX. Strangely,
>VT52 works fine on VMS. Even something as simple as the "clear" command
>refuses to work. Has anyone else suffered similar problems? Any solutions?

The cursor control sequences appear to be decoded before the incoming parity
is stripped.  If your tty driver lets you send eight bit chars, you
can use Chameleon.  I found that setting and then clearing litout on our 4.2 vax
seems to switch  to into no parity mode. (I know. Its a bug, not a feature.)
Does anyone out there have 8 bit mode mods for 4.2?

-- 
    Robert Bond 			nsc!nsc-pdc!rgb
    National Semiconductor		tektronix!reed!nsc-pdc!rgb