Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site ndsuvax.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mgnetp!dicomed!ndsuvax!ncoverby
From: ncoverby@ndsuvax.UUCP (Glen Overby)
Newsgroups: net.micro.cpm
Subject: Re: Xebec 1410 BIOS Help Wanted
Message-ID: <114@ndsuvax.UUCP>
Date: Sun, 16-Jun-85 16:51:22 EDT
Article-I.D.: ndsuvax.114
Posted: Sun Jun 16 16:51:22 1985
Date-Received: Tue, 18-Jun-85 04:38:56 EDT
References: <583@terak.UUCP>
Organization: North Dakota State University, Fargo N.D.
Lines: 15

About two years ago, BYTE magazine had a three part article on putting a 
hard disk on an s-100 cp/m machine. I can't think of the title off hand, 
but I found it to be of some use in developing an interface and driver
for MS-DOS (please forgive the swearing). There were similar request 
in net.micro.pc, you might want to check for followups there.

As I mentioned, I have gotten a hard disk (15-meg) running on my S-100/8088
system, using a WD1002-SHD (an s1410 clone). If you run into any problems,
just holler. Also, I'll be glad to send you a copy of my driver
for ms-dos if you want it.

Glen Overby
at North Dakota State University

...ihnp4!dicomed!ndsuvax!ncoverby