Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site watnot.UUCP
Path: utzoo!watmath!watnot!jajsumner
From: jajsumner@watnot.UUCP ((Mark Dapoz))
Newsgroups: net.micro.cpm
Subject: Intertec disk format
Message-ID: <11306@watnot.UUCP>
Date: Tue, 23-Jul-85 18:12:53 EDT
Article-I.D.: watnot.11306
Posted: Tue Jul 23 18:12:53 1985
Date-Received: Thu, 25-Jul-85 03:47:17 EDT
Reply-To: jajsumner@watnot.UUCP (Mark Dapoz)
Organization: U of Waterloo, Ontario
Lines: 25

Keywords:ampro intertec superbrain 



   I have a small problem which some of you may be able to help me with.  What
I am trying to do is read and write an Intertec Superbrain disk format on my
Ampro Little Board.  The current software on the Ampro doesn't support the
Intertec but I can get it to read and write that format if I know the following
paramaters:   Allocation block size (1K/2K)
              Bytes per sector
              Logical sectors per track
              Block shift factor
              Block mask
              Extent mask or data block allocation size
              Max data block number
              Max directory entries
              Directory group allocation 0
              Directory group allocation 1
              Check size
              Number of reserved tracks
              Skew table format

If any of you out there (especialy the people which own Superbrains) could
possibly get any of this information to me it would be very much appreciated.
      Thanks
        Mark Dapoz
        (jajsumner@watnot)