Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: notesfiles - hp 1.2 08/01/83; site hp-pcd.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!oliveb!hplabs!hp-pcd!dan
From: dan@hp-pcd.UUCP (dan)
Newsgroups: net.micro.hp
Subject: Re: hp86 term emulation
Message-ID: <15100005@hpcvlo.UUCP>
Date: Fri, 19-Jul-85 17:13:00 EDT
Article-I.D.: hpcvlo.15100005
Posted: Fri Jul 19 17:13:00 1985
Date-Received: Mon, 22-Jul-85 20:20:18 EDT
References: <1015@ucbtopaz.UUCP>
Organization: Hewlett-Packard - Corvallis, OR
Lines: 27
Nf-ID: #R:ucbtopaz:-101500:hpcvlo:15100005:000:861
Nf-From: hpcvlo!dan    Jul 19 13:13:00 1985

/***** hpcvlo:net.micro.hp / ucbtopaz!cnrdean /  9:12 am  Jul 15, 1985*/
If you know of a terminal emulation program for a hp86 I would appreciate
any information you can provide.

Sam Scalise
/* ---------- */

The hp86 and 87 have a terminal enulator package which emulates a hp 2622
terminal. According to the 1985 hp product catalogue, what you would need
is a:

    HP 82900A Opt. 001 (HP-86B Term/80) 		$495.

	This is an auxiliary processor modual and software.  If
	you already have a cp/m system, order the HP 82849A software
	only ($200).

    HP 82939A Opt. 001 (RS232 Serial Interface)		$395.

	Option 001 is with a male connector and the standard 82939A
	has a female connector.

I'd double check those order numbers and prices with whoever you place 
your order with in case they have changed.

Hope this helps,
    Dan Garfinkel - Hewlett-Packard