Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site rochester.UUCP Path: utzoo!linus!philabs!cmcl2!seismo!rochester!henry From: henry@rochester.UUCP Newsgroups: net.micro.mac Subject: spacing Message-ID: <10637@rochester.UUCP> Date: Mon, 22-Jul-85 16:58:03 EDT Article-I.D.: rocheste.10637 Posted: Mon Jul 22 16:58:03 1985 Date-Received: Wed, 24-Jul-85 07:17:40 EDT Sender: henry@rochester.UUCP Organization: U. of Rochester, CS Dept. Lines: 38 From: Henry.Kautz >Subject: laserwriter leading >From: jww@sdcsvax.UUCP (Joel West) >Path: seismo!harvard!think!mit-eddie!genrad!decvax!tektronix!hplabs!sdcrdcf!sdcsvax!jww >Organization: CACI, Inc - Federal, La Jolla >Newsgroups: net.micro.mac >Date: 19 Jul 85 00:27:22 GMT > >I'm preparing my first document on the laserwriter and like what I >see. I'm only renting it ($.25/page) and so the success of this >document will probably determine whether I get to buy one or not. > >I like Times-12, and so do most other folks. However, the spacing >between lines is a little too tight. From my days in the newspaper >business, I know that they would increase the leading to make it >more readable. They also do that with our newsletter. > >Is there an easy way to change Times-12 with MacWrite (or Word, >if you must) to add about 10% extra spacing? How hard is it to >define a new laserwriter font with more spacing? I don't want >to spend a month learning postscript, if I can help it. > > Joel West CACI, Inc. - Federal (c/o UC San Diego) > {ucbvax,decvax,ihnp4}!sdcsvax!jww > jww@SDCSVAX.ARPA In WORD, you can set the spacing between lines to whatever you want it to be -- in fractions of an inch, or points, or centimeters. Be sure to get the latest upgrade to WORD before doing your laser-printing -- the original version is very slow at laser printing. (>2 minutes each page.) ---- Henry Kautz :uucp: {seismo|allegra}!rochester!henry :arpa: henry@rochester :mail: Dept. of Comp. Sci., U. of Rochester, NY 14627 :phone: (716) 275-5766