Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site rruxo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!gamma!pyuxww!pyuxv!rruxa!rruxo!lbj
From: lbj@rruxo.UUCP (L Johnson)
Newsgroups: net.music
Subject: 4 Conductor Speaker Wire?
Message-ID: <263@rruxo.UUCP>
Date: Mon, 5-Aug-85 10:29:13 EDT
Article-I.D.: rruxo.263
Posted: Mon Aug  5 10:29:13 1985
Date-Received: Tue, 6-Aug-85 10:51:06 EDT
Organization: Bell Communications Research, Piscataway N.J.
Lines: 11


	I am interested in connecting two cabinets in parallel with about
	40' - 50' between them. The distance from the amplifiers to the
	first cabinet will be about 30' -40'. Each cabinet contains a
	woofer and a pair of JBL Bullet Tweeters. I am going to use
	a bi-amp set-up including an electronic crossover. I've seen
	a 16/4 (16 gauge/4 conductor) cable but I was advised not to use
	it for my purpose because of losses. I don't know if he meant
	power losses or frequency response losses. I know there has to 
	be a solution out there somewhere on the net.