Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site srcsip.UUCP
Path: utzoo!linus!philabs!prls!amdimage!amdcad!amd!pesnta!hplabs!intelca!qantel!ihnp4!stolaf!umn-cs!srcsip!notch
From: notch@srcsip.UUCP (Michael k Notch)
Newsgroups: net.wanted.sources,net.sources
Subject: Wanted: Auto Robots
Message-ID: <940@srcsip.UUCP>
Date: Fri, 26-Jul-85 09:23:55 EDT
Article-I.D.: srcsip.940
Posted: Fri Jul 26 09:23:55 1985
Date-Received: Tue, 30-Jul-85 05:17:27 EDT
References: <562@dicomed.UUCP>
Reply-To: notch@srcsip.UUCP (Michael k Notch)
Organization: Honeywell SRC (SIP), Mpls MN
Lines: 18
Xref: linus net.wanted.sources:1109 net.sources:2845


I have seen a robots program that will run the robots continuisely(?)
while the user hit keys to move the person around.
I believe the name of the program is autorobots.
Anyways - If the source to it is out there, I would really like the source
to it.   Thank you very much.

 "We feel that robots is much better than actual work"

 Michael k Notch  (The small k is on purpose)
 Honeywell Inc.
 2600 Ridgeway Parkway NE
 Minneapolis, Minnesota  55440
 MN17-2349
 SRC/SIP/MVT
 1-612-378-5338

 USENET: ..ihnp4!srcsip!notch