Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site bunny.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!think!harvard!bunny!epm0
From: epm0@bunny.UUCP (Erik Mintz)
Newsgroups: net.info-terms
Subject: Re: VT-100 on DG Ecliplse?
Message-ID: <180@bunny.UUCP>
Date: Thu, 5-Sep-85 14:34:34 EDT
Article-I.D.: bunny.180
Posted: Thu Sep  5 14:34:34 1985
Date-Received: Sat, 7-Sep-85 05:50:31 EDT
References: <177@bunny.UUCP>
Distribution: net
Organization: GTE Laboratories, Waltham, MA
Lines: 16

I found a surprisingly large amount of interest in the idea of
using a VT-100 type terminal on a Data General system (AOS).
Many thanks to all who replied.

Unfortunately, the answers are quite discouraging. Apparently the cursor
control codes are wired directly into the editor program (SED), and thus
can not be altered. There is a way to tell AOS about your terminal, but
this only allows you to terminate commands with a CR instead of New
line, and will not help programs that use direct cursor addressing. The
best one can do is edit in line mode. I guess I will just have to move a
Dasher beside my VT-100.
-- 
Erik Mintz

ARPA or CSnet : epm0%gte-labs.csnet@csnet-relay
UUCP: ...harvard!bunny!epm0