Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/3/84; site panda.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!ucbvax!decvax!genrad!panda!jgc
From: jgc@panda.UUCP (Joseph G. Chin)
Newsgroups: net.micro.apple
Subject: USAGE OF ASCII EXPRES
Message-ID: <827@panda.UUCP>
Date: Wed, 28-Aug-85 14:49:07 EDT
Article-I.D.: panda.827
Posted: Wed Aug 28 14:49:07 1985
Date-Received: Fri, 30-Aug-85 11:33:32 EDT
Reply-To: jgc@panda.UUCP (JC)
Organization: GenRad, Inc., Concord, Mass.
Lines: 9


	I have seen a few articles in using Ascii Express to set up 
some Vt52 terminal simulation. There has been reference to using 5 &
6 to set this up. I'm not quite sure what this means. I have this soft-
ware but I don't have the manuals. I'd appreciate it if someone could 
explain how to set this up. I'm looking for a Vt100 or Vt220 setup. I'm
also confused in setting up the software to autocall and autolink. Thanks 
in advance!

					jc