Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site decwrl.UUCP
Path: utzoo!linus!decvax!decwrl!wasser@viking.DEC (John A. Wasser)
From: wasser@viking.DEC (John A. Wasser)
Newsgroups: net.micro.mac
Subject: MousePads cheap!
Message-ID: <396@decwrl.UUCP>
Date: Wed, 11-Sep-85 11:27:33 EDT
Article-I.D.: decwrl.396
Posted: Wed Sep 11 11:27:33 1985
Date-Received: Thu, 12-Sep-85 23:51:31 EDT
Sender: daemon@decwrl.UUCP
Organization: Digital Equipment Corporation
Lines: 27



	Many of the Mouse Pads being sold today are made of wetsuit
	material.  Most SCUBA shops will stock material for repairs
	which you can buy by the square inch.  The material you should
	ask for is Nylon I (Nylon one) which is Neoprene foam coated
	on one side with Nylon cloth.  The more common type of material
	is Nylon II (Nylon two) which has Nylon cloth on both sides.
	Nylon I is better because the pad won't slip when put rubber
	side down.  I guess Nylon II would work if you could keep
	it from slipping (like glue it to a board).

	The material I bought was Top-of-the-Line material (the only
	Nylon I they had) and cost $0.05 per square inch.

		-John A. Wasser

Work address:
ARPAnet:	WASSER%VIKING.DEC@decwrl.ARPA
Usenet:		{allegra,Shasta,decvax}!decwrl!dec-rhea!dec-viking!wasser
Easynet:	VIKING::WASSER
Telephone:	(617)486-2505
USPS:		Digital Equipment Corp.
		Mail stop: LJO2/E4
		30 Porter Rd
		Littleton, MA  01460