Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!whuxlm!harpo!decvax!tektronix!zehntel!zps!digger
From: digger@zps.UUCP (Scott A. Miles)
Newsgroups: net.micro.pc
Subject: Re: 19.2K bps from std serial card?
Message-ID: <170@zps.UUCP>
Date: Thu, 5-Sep-85 22:51:15 EDT
Article-I.D.: zps.170
Posted: Thu Sep  5 22:51:15 1985
Date-Received: Wed, 11-Sep-85 05:26:32 EDT
References: psuvm.2192QAA
Lines: 8


	Yes it is possible to configure the serial port to at least 19.2K.
	Instead of using the dos or bios call you simply program the
	8250 registers on the serial card yourself. It does work fairly
	well at 19.2K. I have used it to interface between AT's and
	digitizing tablets.

	Scott