Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site mit-amt.MIT.EDU
Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!petrus!bellcore!decvax!genrad!mit-eddie!mit-amt!simsong
From: simsong@mit-amt.MIT.EDU (Simson Garfinkel)
Newsgroups: net.rec.photo
Subject: Re: Photo Chemicals
Message-ID: <7@mit-amt.MIT.EDU>
Date: Tue, 3-Sep-85 09:24:45 EDT
Article-I.D.: mit-amt.7
Posted: Tue Sep  3 09:24:45 1985
Date-Received: Thu, 5-Sep-85 02:27:15 EDT
References: <1457@cbosgd.UUCP>
Organization: MIT Media Lab, Cambridge, MA
Lines: 13
Keywords: Developer
Summary: Way to store photochems

In article <1457@cbosgd.UUCP>, fohl@cbosgd.UUCP (Mark Fohl) writes:
> Can anyone out there
> recommend something for storing dry photo chemicals?  I keep the stuff in my
> basement where the humidity is fairly high.  I'd appreciate any suggestions.
> Replies over the net are OK.

Those freezer-bag sealer systems that were fairly popular a few years
ago seem to work fine for photo chemicals, but be sure that there is no
water in the bag when you seal it.

The system consists of bags and a sealer. You put the chemicals (or food
to freeze) in a specially made bag. The bag is then sealed with heat --
the opening is fused. This is a fairly good storage system.