Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/17/84; site ittvax.ATC.ITT.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!ucbvax!decvax!ittatc!ittvax!paulsen
From: paulsen@ittvax.ATC.ITT.UUCP (Bill Paulsen)
Newsgroups: net.auto
Subject: Honda Discs
Message-ID: <482@ittvax.ATC.ITT.UUCP>
Date: Fri, 20-Sep-85 14:22:38 EDT
Article-I.D.: ittvax.482
Posted: Fri Sep 20 14:22:38 1985
Date-Received: Sun, 22-Sep-85 05:46:39 EDT
Distribution: net
Organization: ITT-ATC, Shelton Ct.
Lines: 8

Has anyone replaced the disc rotors on a Honda by him/her self?
Service manuals say a normal person can't remove the hub from the knuckle.
Also, they say the wheel bearings must be replaced, which means using a
hydraulic press.  Can I just use a slide hammer to remove the hub,
replace the disc, and then put the hub back in?

The car is a 1980 Accord, suffering from steering wheel vibration,
probably caused by warped discs, which is common on these cars.


Brought to you by Super Global Mega Corp .com