Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/17/84; site hao.UUCP Path: utzoo!decvax!genrad!mit-eddie!think!harvard!seismo!hao!kitten From: kitten@hao.UUCP Newsgroups: net.auto Subject: Distributor Plate Message-ID: <1773@hao.UUCP> Date: Tue, 24-Sep-85 23:18:41 EDT Article-I.D.: hao.1773 Posted: Tue Sep 24 23:18:41 1985 Date-Received: Sat, 28-Sep-85 13:18:13 EDT Sender: kitten@hao.UUCP Distribution: na Organization: High Altitude Obs./NCAR, Boulder CO Lines: 30 ** For all you lovers of technical articles, here's one now. I have a 1974 Mustang II which I have owned since 6/80. It has almost 169K miles on it. I'm trying to keep it alive for another year. When I got the high-altitude tune up, the mechanic (which I used to work with in California, so he is trustworthy) said that my distributor plate is worn. I didn't have the bucks to just replace it outright at the time, so I just took it home. Yesterday morning, I had to go out. The auto-choke was only partially working, instead of 2000-2500rpm I was getting only 1500, which was irregular. As I pulled out, I found it was missing badly, I was running on only 3 or 4 cylinders at best, possibly 2 at times. I was thinking of turning back, but figured perhaps it would improve as it warmed up. Sure enough, it did, no missing, and power restored. It's done the same thing two mornings in a row. I had a simular missing problem (very minor) about 1 1/2 weeks ago, when warm, and under accleration. Also, I am wondering if my warm air valve on th fresh air tube is on the blink. Could this problem be the distributor plate, could it be tempature sensitive (it's been in the mid-30's overnight)? Or is it the warm air valve? If it's the valve, how do I check it? Or is it something else entirely? Any assistance is *greatly* appreciated. {ucbvax!hplabs | allegra!nbires | decvax!noao | harpo!seismo | ihnp4!noao} !hao!kitten CSNET: kitten@NCAR ARPA: kitten%ncar@CSNET-RELAY (God, please don't make it something expensive!) Brought to you by Super Global Mega Corp .com