Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site rochester.UUCP Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!think!harvard!seismo!rochester!ciaraldi From: ciaraldi@rochester.UUCP Newsgroups: net.decus Subject: TSX-Plus/RT-11 Help Wanted Message-ID: <12035@rochester.UUCP> Date: Thu, 3-Oct-85 02:27:17 EDT Article-I.D.: rocheste.12035 Posted: Thu Oct 3 02:27:17 1985 Date-Received: Sat, 5-Oct-85 07:18:27 EDT Sender: ciaraldi@rochester.UUCP Organization: U. of Rochester, CS Dept. Lines: 35 From: Mike Ciaraldi Can anyone give me some help on the TSX-Plus timesharing system which runs with RT-11? Specifically, I am helping someone expand his system. He now has a PDP-11/44 running RT-11 version 4.0 and TSX-Plus. He wants to add another terminal. He already has the serial port hardware, he just needs to adjust the software. He presently has 2 DLV11-J 4-port serial boards. 4 ports are used for terminals, two are for the printers. The other two are not being used. He wants to set one up for a modem (incoming). So, the question is... Does he hacve to re-do his RT-11 SYSGEN? Or does he have to INSTALL another terminal handler? Or does he just re-do TSGEN? I ran the RESORC command and it says that RT-11 has no multi-terminal support, but looking in the SYCND.MAC file seems to indicate it was requested. Does TSX totally override what RT-11 set up? As you can see, I don't know a lot about how this system was set up (someone did it for them 3 years ago and it hasn't changed since). I read through the RT-11 SYSGEN manual and the TSX manual and there are an awful lot of things they leave out, such as EXACT definitions of some technical terms. Thanks in advance for any help you can give. Mike Ciaraldi seismo!rochester!ciaraldi Brought to you by Super Global Mega Corp .com