Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.7.0.8 $; site convex
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!convex!wilson
From: wilson@convex.UUCP
Newsgroups: net.rec.wood
Subject: Stuck Boards in INCA
Message-ID: <50800004@convex>
Date: Fri, 27-Sep-85 10:18:00 EDT
Article-I.D.: convex.50800004
Posted: Fri Sep 27 10:18:00 1985
Date-Received: Sun, 29-Sep-85 06:18:00 EDT
Lines: 12
Nf-ID: #N:convex:50800004:000:647
Nf-From: convex.UUCP!wilson    Sep 27 09:18:00 1985


A friend of mine has an INCA thicknesser/planer - the manual feed model.
I have used it a number of times with good results.  The problem is 
(lots of you can probably hear this coming) occasionally a board can be
EXTREMELY difficult to push through.  Not royally stuck, just hard to push.
Waxing the jointer bed helps but after 9 or 10 boards its back to grunt and
curse.  Anyone familiar with a solution?  Help appreciated.

                               Stuart Wilson
                               Convex Computer Corp.
                               Richardson, Tx.
                               {ihnp4,allegra,uiucdcs,ctvax}!convex!wilson


Brought to you by Super Global Mega Corp .com