Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83; site uvm-cs.UUCP Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!decvax!dartvax!uvm-gen!uvm-cs!hartley From: hartley@uvm-cs.UUCP (Steve) Newsgroups: net.unix Subject: calling a terminal Message-ID: <426@uvm-cs.UUCP> Date: Wed, 4-Sep-85 07:35:57 EDT Article-I.D.: uvm-cs.426 Posted: Wed Sep 4 07:35:57 1985 Date-Received: Fri, 6-Sep-85 03:16:48 EDT Expires: Mon, 30-Sep-85 00:00:00 EDT Organization: UVM Lines: 60 Here is the quick and dirty script (please, no flames about using csh, I am just a professor) I use to have the VAX (4.2 BSD) call me at home. It works with a DEC DF03 modem only (/dev/ttyi1), and observes the tip/uucp locking protocol. I have my own cron and crontab, and schedule calls from there. The Burlington area phone company has gone to measured service for everybody. #! /bin/csh -f # call a terminal, run setuid to root, executable from group tippers set path=(/bin /usr/bin /usr/ucb /etc) setenv PATH /bin:/usr/bin:/usr/ucb:/etc onintr - echo " Calling $1 at `date` ($$)" >>/usr/spool/uucp/LOGFILE set status=0 csh -f <<-EOF- set noclobber cat /dev/null >/usr/spool/uucp/LCK..ttyi1 -EOF- if ($status == 0) then ed /etc/ttys </dev/ttyi1 sleep 180 set HERE=`w | grep -c ttyi1` if ($HERE) then echo " Call to $1 succeeded ($$)" >>/usr/spool/uucp/LOGFILE else echo " Call to $1 failed ($$)" >>/usr/spool/uucp/LOGFILE endif while ($HERE) sleep 180 set HERE=`w | grep -c ttyi1` end sleep 1 ed /etc/ttys <>/usr/spool/uucp/LOGFILE else echo " But the dialer is LOCKED ($$)" >>/usr/spool/uucp/LOGFILE endif -- "If that's true, then I'm the Pope!" Stephen J. Hartley USENET: {decvax,ihnp4}!dartvax!uvm-gen!uvm-cs!hartley University of Vermont CSNET: hartley%uvm@csnet-relay (802) 656-3330, 862-5323