Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: $Revision: 1.6.2.16 $; site datacube.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!think!datacube!berger
From: berger@datacube.UUCP
Newsgroups: net.unix
Subject: Re: A second DMA (DR11-W) interface/driv
Message-ID: <15800001@datacube.UUCP>
Date: Thu, 19-Sep-85 21:40:00 EDT
Article-I.D.: datacube.15800001
Posted: Thu Sep 19 21:40:00 1985
Date-Received: Sun, 22-Sep-85 06:20:27 EDT
References: <697@ctcgrafx.UUCP>
Lines: 26
Nf-ID: #R:ctcgrafx:-69700:datacube:15800001:000:811
Nf-From: datacube!berger    Sep 19 21:40:00 1985


Since you did not specify much of a path, I will place a response
here...

Another alternative would be to use one of our frame-grabbers that
plugs directly into the Q-bus.  We have a 768 x 512 x 8 bit frame-grabber
board set that can plug directly into a cadmus 9000.  I even have some
driver code for it!

One of our oems uses 3 of these QVG-123 board sets for true 24 bit color
digitization and display.

We also make various other frame-grabber / image-processing boards
for VME, Multibus and the IBM PC.

(Hope this is not too much of a commercial!:)

			Bob Berger 

Datacube Inc. 4 Dearborn Rd. Peabody, Ma 01960 	617-535-6644
	
ihnp4!datacube!berger
ima!inmet!mirror!datacube!berger
decvax!cca!mirror!datacube!berger
decvax!genrad!wjh12!mirror!datacube!berger
{mit-eddie,cyb0vax}!mirror!datacube!berger


Brought to you by Super Global Mega Corp .com