Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site varian.UUCP Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!tektronix!zehntel!varian!david From: david@varian.UUCP (David Brown) Newsgroups: net.bugs.4bsd,net.unix Subject: DMZ32 and MDMBUF Message-ID: <376@varian.UUCP> Date: Mon, 30-Sep-85 20:11:13 EDT Article-I.D.: varian.376 Posted: Mon Sep 30 20:11:13 1985 Date-Received: Sat, 5-Oct-85 03:15:28 EDT Distribution: net Organization: Varian, Walnut Creek, CA Lines: 33 Xref: watmath net.bugs.4bsd:1788 net.unix:5798 Has anyone had any luck with the MDMBUF ioctl (stop/start output when carrier drops) in 4.2BSD or ULTRIX? I've heard that the support for MDMBUF is implemented in drivers for some hardware, but not others (e.g. dh, dz...). Is that true? If so, does anyone know if it is supported by the dmz32 driver in ULTRIX 1.1? If (as I fear) the answer is not supported, does anyone have any other suggestions? I'm trying to hook up some serial printers that use DTR for flow control to our 11/750 running ULTRIX 1.1 with a DMZ32 multiplexor (this is DEC's new 24-line MUX with remote panel). This particular machine does not have a source license (though all of our others do). The printers only drop DTR on buffer full; they do not send XOFF. In the past, I've hooked up serial printers in a variety of ways: 1) on our pdp11, which is a v7/2.8 hybrid, I added some modifications to the tty and dh drivers which were on the 1980 Usenix tape (tektronix). 2) on our VAX 11/780, I used some jumpers on the Able DH/DM board that select hardware flow control (via pin 22 - RING) on individual lines. This was my favorite solution, as it required no software change (just a special cable). 3) I could purchase a printer buffer box that uses XON/XOFF for flow control. Thanks in advance -- David Brown (415) 945-2199 Varian Instruments 2700 Mitchell Dr. Walnut Creek, Ca. 94598 {zehntel,dual,amd,fortune,rtech}!varian!david Brought to you by Super Global Mega Corp .com