Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site umree.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mgnetp!we53!busch!wucs!umree!rwl
From: rwl@umree.UUCP (Wayne Little)
Newsgroups: net.unix-wizards,net.bugs.uucp
Subject: Help sought on problem with uucp acucntrl
Message-ID: <106@umree.UUCP>
Date: Fri, 18-Oct-85 19:00:23 EDT
Article-I.D.: umree.106
Posted: Fri Oct 18 19:00:23 1985
Date-Received: Mon, 21-Oct-85 03:42:47 EDT
Organization: University of Missouri - Rolla,Rolla MO
Lines: 25
Keywords: uucp modem
Xref: watmath net.unix-wizards:15348 net.bugs.uucp:618

We are running 4.2 BSD, and recently installed the 4.3 version uucp 
sporting in/out dialing on the same modem.  This version was recently
distributed by Tom Truscott & Bob Gray via Rick Adams March 4, 1985,
according to the README.

We are experiencing a side effect with the acucntrl part of uucp 4.3.
The dial out part "turns off" the getty and works fine, but the getty does
not get restarted on the line & I can't get it to come back (kill -HUP 1
doesn't work, and the line in /etc/ttys is enabled).  The only thing that
has reenabled the getty is a reboot (following a crash - we're not that
desparate for lines).

I can disable and reenable other lines manually (edit /etc/ttys & kill -HUP 1).
I also tried another line besides tty07 to make sure it wasnt the line.
I also tried physically disconnecting the line to ensure a drop of DTR.
We are using a hayes modem; line from L-devices is:
ACU tty07 inout 1200 hayesq

The dialogue from uucico says that the line is being enabled, but no cigar and
no getty thereafter (until a reboot).

Any words of advice or enlightenment would be greatly appreciated.
(I have another dialing scheme lined up to try if no fix is pending.)

Thanks in advance!