Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2.fluke 9/24/84; site vax4.fluke.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!whuxlm!whuxl!houxm!vax135!cornell!uw-beaver!fluke!star
From: star@fluke.UUCP (David Whitlock)
Newsgroups: net.micro.amiga
Subject: AMIGA Serial Port Information Needed (please)
Message-ID: <2807@vax4.fluke.UUCP>
Date: Thu, 17-Oct-85 09:39:15 EDT
Article-I.D.: vax4.2807
Posted: Thu Oct 17 09:39:15 1985
Date-Received: Sat, 19-Oct-85 06:14:50 EDT
Distribution: net
Organization: John Fluke Mfg. Co., Inc., Everett, WA
Lines: 19

I am trying to communicate to the Amigas Serial Port via ABasiC.  I have
noted that in 'preferences' I can set the Baud Rate, but I have not discovered
the key to seting up all the other parameters such as Stop Bits, Parity etc.

Can someone please post information that covers in detail what one would have
to do to complete this configuration.

Also, I need to know the reference name for the serial port,  I know that
"prt:" is the reference name for the printer port and have tried just about
every three letter and : combination for the serial port, with no success.

Best Regards,

Dave

P.S.

Does anyone else have a 256K machine, if so, would you please post some of
the pitfalls you have encountered so far.