Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.16 $; site mirror.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!petrus!bellcore!decvax!cca!mirror!jib
From: jib@mirror.UUCP
Newsgroups: net.micro.apple
Subject: APPLEWORKS AND GRAPPLER -- HELP!
Message-ID: <7800003@mirror.UUCP>
Date: Tue, 22-Oct-85 16:40:00 EDT
Article-I.D.: mirror.7800003
Posted: Tue Oct 22 16:40:00 1985
Date-Received: Fri, 25-Oct-85 04:08:24 EDT
Lines: 24
Nf-ID: #N:mirror:7800003:000:1089
Nf-From: mirror!jib    Oct 22 16:40:00 1985


I'm writing this question for a friend with an Apple IIe who is not on the
network:

He has an Apple IIe with 128K Ram, a Grappler Plus interface (w/ 16K
buffer) and an Okidata 92 printer.  He is having trouble using his system
with Appleworks.  Specifically, he cannot configure Appleworks properly
for his printer/interface combination.  He wants to set the Okidata to
Correspondence Quality mode, but Appleworks prints 80N on both the screen
and paper whenever he tries to print.  It sounds (to me) like Appleworks is
sending an initialize command to the Grappler card thinking that it is an
Apple parallel printer interface card.

Does anyone have experience with using Appleworks with a Grappler card?
(He is using Appleworks version 1.0).  Any assistance would be appreciated.
Please send responses to me by Unix-mail or post to the net.

Thanks.

---------------------------------------------------------------------------
Jim Block  {cca, ihnp4!inmet, mit-eddie, wjh12, datacube} !mirror!prism!jib

Mirror Systems, Inc.	2067 Massachusetts Ave.
(617) 661-0777		Cambridge, MA 02140