Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site utah-gr.UUCP
Path: utzoo!linus!decvax!ucbvax!ucdavis!lll-crg!seismo!utah-cs!utah-gr!thomas
From: thomas@utah-gr.UUCP (Spencer W. Thomas)
Newsgroups: net.micro.mac
Subject: Re: MacTerminal and missing ImageWriter file
Message-ID: <1607@utah-gr.UUCP>
Date: Mon, 21-Oct-85 01:39:36 EDT
Article-I.D.: utah-gr.1607
Posted: Mon Oct 21 01:39:36 1985
Date-Received: Tue, 22-Oct-85 07:02:27 EDT
References: <249@sdcarl.UUCP>
Reply-To: thomas@utah-gr.UUCP (Spencer W. Thomas)
Organization: Univ of Utah CS Dept
Lines: 18

Rusty@sdcarl asks how to avoid the alert box that MacTerminal puts up if
there is no ImageWriter file.

I went into my MacTerminal with Resource Editor and turned off the alert
box.  Not too hard: Pop up the list of ALRTs and the list of DITLs.
Start looking at the DITLs match ALRTs (same ID) until you find one that
says 'There is not file "" on your disk.  You can run MacTerminal, but
you will be unable to print.'  (This is 4196 in MacTerminal 1.1.)  Then
open the corresponding ALRT item and set all the "stg?snd*" and
"stg?boxDrawn" buttons to 0.  This should prevent the alert box from
appearing.


-- 
=Spencer   ({ihnp4,decvax}!utah-cs!thomas, thomas@utah-cs.ARPA)
	"When wrath runs rampage in your heart you must hold still
	 that rambunctions tongue!" - Sappho