Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site ccice2.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!whuxlm!harpo!decvax!ucbvax!ucdavis!lll-crg!seismo!rochester!ritcv!ccice5!ccice2!cjb
From: cjb@ccice2.UUCP (Curtis J. Braun)
Newsgroups: net.micro.pc
Subject: Object Code Format - MS-DOS
Message-ID: <659@ccice2.UUCP>
Date: Thu, 10-Oct-85 13:16:59 EDT
Article-I.D.: ccice2.659
Posted: Thu Oct 10 13:16:59 1985
Date-Received: Sun, 13-Oct-85 04:45:50 EDT
Distribution: net
Organization: CCI Central Engineering, Rochester, NY
Lines: 20

I'm sure that this request has been made before, but...

I would like to design a 8086/8088 based board and
develop the application program on my Eagle Turbo.
Therefore, I am looking for info on either the DOS.obj
format or a locating linker. I can write my own linker
if I can get the .obj info, but I'd rather not. I will also
need a conversion program from the linker output to 
Intel hex foramt to download it to my prom burner.

Hence, if any one knows of a linker to make proms with 
ASEG, CSEG, and DSEG partitions, and hex formater please
mail response. If you have leads for the object formats for
Desmet C, Lattice C, or Microsoft C, that would also help.

Thanks in advance, Curtis

Curtis Braun (!rochester!ccice5!ccice6!cjb)

Somedays, you just gotta break those fingers to make them work....