Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site srcsip.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!stolaf!umn-cs!mmm!srcsip!meier
From: meier@srcsip.UUCP (Christopher M. Meier)
Newsgroups: net.unix-wizards
Subject: Re: Online Formatter for 4.2BSD
Message-ID: <1504@srcsip.UUCP>
Date: Sat, 5-Oct-85 15:10:19 EDT
Article-I.D.: srcsip.1504
Posted: Sat Oct  5 15:10:19 1985
Date-Received: Mon, 7-Oct-85 05:58:09 EDT
References: <1838@brl-tgr.ARPA>
Reply-To: meier@srcsip.UUCP (Christopher M. Meier)
Organization: Honeywell SRC (SIP), Mpls MN
Lines: 16
Summary: 

In article <1838@brl-tgr.ARPA> jeff@ISI-VAXA.ARPA (Jeffery A. Cavallaro) writes:
>I was once connected with a lab that had SI hardware and 4.2BSD.  It was
>found that the SI hardware and the 4.2BSD disk driver were not compatible.
>There was a problem with the next-block counter in the disk controller that
>caused ALL KINDS of nifty problems, especially with bad block forwarding.
>
>In that SI hardware and 4.2BSD drivers are not compatible, I would venture
>a guess that SI software and normal DEC hardware are also not compatible.
>
>						Jeff

Are there any other online formatters available for 4.2BSD (on a 750
using Emulux sc7000 or 750 controller) ?

Christopher Meier	ihnp4!umn-cs!srcsip!meier	Honeywell S&RC/SIP
			philabs!srcsip!meier