Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!mhuxv!akgua!gatech!seismo!lll-crg!ucdavis!ucbvax!info-vax
From: manager@UMDHEP.BITNET
Newsgroups: mod.computers.vax
Subject: Re: Cable from a VAXStation to a VAX...
Message-ID: <851122060145.001@umdhep>
Date: Fri, 22-Nov-85 06:04:48 EST
Article-I.D.: umdhep.851122060145.001
Posted: Fri Nov 22 06:04:48 1985
Date-Received: Sun, 24-Nov-85 11:17:38 EST
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 10
Approved: info-vax@sri-kl.arpa

Jon,

As far as I remember from when I connected between VS I and VAX11/780,
I used a null modem at the VAX end, with a regular cable running from
that to the uVAX. I used KERMIT with great success. The only problem
I encountered was that 9600 was too fast, so I had to stay down at
4800 baud. If you continue to have problems, let me know and I'lll
puzzle out the precise configuration needed.

Todd Aven