Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: $Revision: 1.6.2.16 $; site mcvax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!whuxl!whuxlm!akgua!gatech!seismo!hao!ico!mcvax!piet
From: piet@mcvax.UUCP
Newsgroups: net.lan
Subject: Re: Orphaned Response
Message-ID: <-88400@mcvax.UUCP>
Date: Fri, 15-Nov-85 13:22:00 EST
Article-I.D.: mcvax.-88400
Posted: Fri Nov 15 13:22:00 1985
Date-Received: Tue, 19-Nov-85 04:07:54 EST
References: <448@rna.UUCP>
Lines: 18
Nf-From: #R:rna:-44800:mcvax:-88400:37777777600:806



	>>We are having problems switching an Ethernet on a DELNI onto a
	>>real Ethernet cable.
	>We have similar problems. It seems not acceptable to mix Interlan and
	>DEC (DEUNA or DEQNA) on the same DELNI, unless the DELNI is stand-alone
	>The problem is quite likely that the Interlan controllers are Ethernet
	>1.0 specs (at least, ours are).
We've a DEUNA, Interlan's and 3Com's on two DELNIs (in cascade with one of them
on Ethernet, which according to the specs is not allowed...)
It's all working just fine. The Interlans are Eth.2 spec, the 3Coms are Eth.1.
However, another 3Com, when connected to the DELNI, screws up the whole net.
Put it on an Eth.1 transceiver and it's ok. Matter of luck... In general don't
connect Eth.1 stuff to DELNIs.

-- 
	Piet Beertema, CWI, Amsterdam
	(piet@mcvax.UUCP)