Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ptsfd.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!lll-crg!dual!ptsfa!ptsfd!jdf
From: jdf@ptsfd.UUCP (Jack Fine)
Newsgroups: net.micro,net.micro.pc
Subject: Quadram with Crosstalk
Message-ID: <237@ptsfd.UUCP>
Date: Wed, 13-Nov-85 15:59:37 EST
Article-I.D.: ptsfd.237
Posted: Wed Nov 13 15:59:37 1985
Date-Received: Fri, 15-Nov-85 08:22:32 EST
Organization: Pacific Bell, San Francisco
Lines: 15
Xref: linus net.micro:11463 net.micro.pc:5576

I need some information about using Crosstalk with the Quadram 384 k 
expansion board.  Ever since I upgraded from 256 k board to 384 k board
my Crosstalk program is dropping the first characters on a line.  Not
consistently but with several remote machines and always will do it at
least a few times during a login session.  I tried the same everything
on another machine without the 384 k board and it works (modem, line,
software so on..)  I replaced the whole pc with another machine and different
board (also a 384 k) and the problem is still there.  Any ideas?  This is
real annoying.  Does Microstuff read this ?  If so please HELP!

Jack Fine 
Pac Bell


w