Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site osu-eddie.UUCP
Path: utzoo!watmath!clyde!cbosgd!osu-eddie!mdf
From: mdf@osu-eddie.UUCP (Mark D. Freeman)
Newsgroups: net.micro
Subject: Re: Request for advice
Message-ID: <915@osu-eddie.UUCP>
Date: Wed, 4-Dec-85 14:13:23 EST
Article-I.D.: osu-eddi.915
Posted: Wed Dec  4 14:13:23 1985
Date-Received: Thu, 5-Dec-85 08:41:18 EST
References: <96@brl-tgr.ARPA>
Reply-To: mdf@osu-eddie.UUCP (Mark D. Freeman)
Distribution: net
Organization: Ohio State Univ., CIS Dept., Cols, Oh.
Lines: 9


As long as the manual to the multifunction board in the PC-clone swears that
it knows how to deal with 256 RAM chips, then you may do exactly as you
supposed, and software won't know the difference.

If the PC Clone runs at the standard 4.77 MHz, you can get away with using
200 mS RAM chips.  If you are running faster than that, make sure that you
are buying 150 mS chips.  I haven't found static to be much of a problem
when installing RAM chips.