Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site sdcsvax.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mhuxn!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!tektronix!hplabs!sdcrdcf!sdcsvax!manderso
From: manderso@sdcsvax.UUCP (Mark Anderson)
Newsgroups: net.micro.amiga
Subject: help setting up printer!
Message-ID: <1194@sdcsvax.UUCP>
Date: Tue, 12-Nov-85 14:27:47 EST
Article-I.D.: sdcsvax.1194
Posted: Tue Nov 12 14:27:47 1985
Date-Received: Fri, 15-Nov-85 04:17:33 EST
Organization: EECS Dept. U.C. San Diego
Lines: 23
Keywords: printer


I've got a problem that I hope someone out there can help with.

I just got my amiga and have been trying to set it up
with my Gemini-15 (Star Micronics) printer.
The printer is Epson "compatible" (for the most part).
I've used preference to set up the printer as Epson.
My trouble is that when I use notepad to print out a 
note (as graphics) every other line is blank.

Can somebody help me in one or more of the following ways:
1) Tell me I'm a fool because your Gemini works in the
   above configuration. (give DIP switch settings)
2) Post a Patch program to fix the printer specification.
3) Describe the format of the printer specification file.

I bought the system as a plain old consumer, so I don't
have extensive documentation or a c compiler.
I would appreciate any help or suggestions.

				Mark Anderson
				sdcsvax!manderso (uucp)
				manderso@ucsd    (arpa)