Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site gitpyr.UUCP
Path: utzoo!watmath!clyde!cbosgd!gatech!gitpyr!robert
From: robert@gitpyr.UUCP (Robert Viduya)
Newsgroups: net.micro.amiga
Subject: Re: CLI Summary
Message-ID: <1114@gitpyr.UUCP>
Date: Thu, 28-Nov-85 21:30:54 EST
Article-I.D.: gitpyr.1114
Posted: Thu Nov 28 21:30:54 1985
Date-Received: Sat, 30-Nov-85 06:22:55 EST
References: <578@caip.RUTGERS.EDU>
Reply-To: robert@gitpyr.UUCP (Robert Viduya)
Organization: Office of Computing Services, Georgia Tech
Lines: 27

>CC004049%BROWNVM.BITNET@WISCVM.ARPA (CC004049%BROWNVM.BITNET@WISCVM.ARPA, <578@caip.RUTGERS.EDU>):
> From: George S. Musser Jr.
>
> TYPE            Dump file contents to the console.  You can use TYPE on
>                 non-text files, but it usually sets the font to
>                 gibberish, so you have to ENDCLI and get a new CLI.

I've found it to be much easier to just type "esc c" (escape followed by a
lowercase c).  I discovered early on that the console driver on the amiga
was based on ANSI's X3.64 and an escape c is essentially a reset-all in
X3.64.

By the way, an article was recently posted giving all the escape codes that
the printer driver understood.  Could someone in the know also post the same,
but for the console driver?  I've figured out most of it (X3.64 references
can be handy), but I don't know if I've missed anything or not.

			robert
-- 
Robert Viduya							01111000
Office of Computing Services
Georgia Institute of Technology

UUCP:	..gatech!gitpyr!robert
	..gatech!gt-oscar!robert
	..gatech!gt-felix!robert
BITNET:	CC100RV @ GITVM1