Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site trwrba.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mhuxn!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!tektronix!hplabs!sdcrdcf!trwrb!trwrba!rjs
From: rjs@trwrba.UUCP (Robert J. Suyehara)
Newsgroups: net.micro.mac
Subject: MacDraw Print Problem
Message-ID: <1676@trwrba.UUCP>
Date: Tue, 12-Nov-85 13:35:57 EST
Article-I.D.: trwrba.1676
Posted: Tue Nov 12 13:35:57 1985
Date-Received: Fri, 15-Nov-85 04:22:21 EST
Organization: TRW EDS, Redondo Beach, CA
Lines: 16

I have a fairly large MacDraw document (47k) which I would like
to print on the Imagewriter without page breaks.  The document
takes up 12 landscape pages (four pages across by three pages
down).  According to the MacDraw manual, if you select "wide"
(landscape) orientation, the document should print in horizontal
strips from the top to the bottom.  However, when I tried it, the
document printed in vertical strips from left to right with page
breaks.  "Tall adjusted" works correctly (vertical strips from left
to right without page breaks).  Is this a "bug" in MacDraw or am I
doing something wrong?  Has anyone had success with "wide"
orientation printing?  Any information would be appreciated.  Yes,
I did select "No breaks between pages" with Page Setup.

Bob Suyehara