Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site medstar.UUCP
Path: utzoo!watmath!clyde!cbosgd!gatech!medstar!roy
From: roy@medstar.UUCP (Roy Talledo)
Newsgroups: net.micro,net.micro.pc
Subject: Re: Quadram with Crosstalk
Message-ID: <205@medstar.UUCP>
Date: Thu, 14-Nov-85 13:15:17 EST
Article-I.D.: medstar.205
Posted: Thu Nov 14 13:15:17 1985
Date-Received: Fri, 15-Nov-85 05:40:00 EST
References: <237@ptsfd.UUCP>
Organization: Medical Systems Technology and Research, Inc., Atlanta, Ga.
Lines: 23
Xref: watmath net.micro:12693 net.micro.pc:5860

> ...  Ever since I upgraded from 256 k board to 384 k board
> my Crosstalk program is dropping the first characters on a line.  Not
> consistently but with several remote machines and always will do it at
> least a few times during a login session.  I tried the same everything
> on another machine without the 384 k board and it works (modem, line,
> software so on..)  I replaced the whole pc with another machine and different
> board (also a 384 k) and the problem is still there. 
> 
> Jack Fine 
> Pac Bell

I have never had any problems running Crosstalk with a Quadboard 384K.  I 
have used both version 3.5 and 3.6 and they both work fine.  Could you have
two serial ports both addressed as COM1 or COM2 ?

--Roy
-- 
Roy A. Talledo

Medical Systems Technology & Research (MedSTAR)
Atlanta, GA
 
uucp:  ..!{akgua,gatech}!medstar!roy