Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site omen.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!houxm!vax135!cornell!uw-beaver!tektronix!reed!omen!caf
From: caf@omen.UUCP (Chuck Forsberg WA7KGX)
Newsgroups: net.micro.pc
Subject: Re: XTALK 3.6 and Kermit
Message-ID: <266@omen.UUCP>
Date: Fri, 6-Dec-85 13:07:26 EST
Article-I.D.: omen.266
Posted: Fri Dec  6 13:07:26 1985
Date-Received: Sat, 7-Dec-85 20:43:39 EST
References: <1412@sphinx.UChicago.UUCP>
Reply-To: caf@omen.UUCP (Chuck Forsberg WA7KGX)
Organization: Omen Technology, Portland
Lines: 21
Summary: 

In article <1412@sphinx.UChicago.UUCP> cjdb@sphinx.UChicago.UUCP (Charles Blair) writes:
>
>XTALK version 3.6 is supposed to support Kermit. I've tried it with a
>Kermit server on a DEC-20 without success. The XTALK support people say
>they've tried it (on another mainframe) with success. Does anyone have
>any ideas as to where I might start looking for the problem? (Let me
>add that I have been using version 2.0 of MS-DOS Kermit on an IBM PC to
>talk to Kermit on the same DEC-20 without any problem at all.)

You might wish to download YAMDEMO.LQR from Telegodzilla at 503-621-3746.
This contains a more complete Kermit implementation, including about a
dozen server access commands.  When running YAM/YAMDEMO's Kermit, be sure
the parity setting (8n, 7e, 7m, etc.) matches what your mainframe Kermit
expects.  If perchance it doesn't work properly, I'd like to hear about it.

-- 
  Chuck Forsberg WA7KGX   ...!tektronix!reed!omen!caf   CIS:70715,131
Omen Technology Inc     17505-V NW Sauvie Island Road Portland OR 97231
Home of Professional-YAM, the most powerful COMM program for the IBM PC
Voice: 503-621-3406     Modem: 503-621-3746 (Hit CR's for speed detect)
omen Any ACU 1200 1-503-621-3746 se:--se: link ord: Giznoid in:--in: uucp