Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 alpha 4/15/85; site slu70.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mgnetp!we53!busch!wucs!slu70!guy
From: guy@slu70.UUCP (Guy M. Smith)
Newsgroups: net.rec.wood
Subject: Re: most valuable tools & other matters
Message-ID: <126@slu70.UUCP>
Date: Wed, 13-Nov-85 13:28:46 EST
Article-I.D.: slu70.126
Posted: Wed Nov 13 13:28:46 1985
Date-Received: Fri, 15-Nov-85 04:53:51 EST
References: <828@rlgvax.UUCP> <34@midas.UUCP> <662@hercules.UUCP> <361@tekchips.UUCP>
Organization: Saint Louis University, St. Louis, MO
Lines: 10
Summary: Sears sockets

In article <361@tekchips.UUCP>, toma@tekchips.UUCP (Tom Almy) writes:
A socket set (not everything was woodworking) that I don't
> think could ever break.
> 

You can break Sears socket sets but it's not easy. A friend managed to
twist the head off my half inch breaker bar in the process of removing
a VW flywheel (the older ones had a single nut torqued to about 240 pounds).
The nice thing about the whole mess is that the tools have a lifetime
guarantee and Sears replaced it on the spot, no questions asked.