Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!ucbvax!apollo
From: apollo@ucbvax.UUCP
Newsgroups: mod.computers.apollo
Subject: Re: Laserwriters and Apollos
Message-ID: <8512141521.AA10008@utah-cs.ARPA>
Date: Sat, 14-Dec-85 10:21:57 EST
Article-I.D.: utah-cs.8512141521.AA10008
Posted: Sat Dec 14 10:21:57 1985
Date-Received: Sat, 14-Dec-85 20:39:37 EST
References: <12165797101.6.CMP.BARC@R20.UTEXAS.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Univ of Utah CS Dept
Lines: 12
Approved: apollo@yale-comix.arpa


	Don't have the reference at hand but see the System Adm
Guide.  If you have SR9 you just make a printer config file with
LASERWRITER as the the type, 9600 baud and pick an SIO line.  Then
bring up a print server as the manual says and you have it.  The
printer will work as a TEXT device, -PLOT option of prf is NOT
supported but if you are further interested I can send you SCREEN ->
POSTSCRIPT conversion programs.  Oh yes the Laserwriter is set to
9600 for all this to work.

--jim schimpf schimpf@utah-20