Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site jhunix.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!gatech!seismo!umcp-cs!aplcen!jhunix!ins_aeas
From: ins_aeas@jhunix.UUCP (Earle A .Sugar)
Newsgroups: net.micro.apple
Subject: Re: Applewriter in 80 columns
Message-ID: <1387@jhunix.UUCP>
Date: Sat, 7-Dec-85 09:36:05 EST
Article-I.D.: jhunix.1387
Posted: Sat Dec  7 09:36:05 1985
Date-Received: Mon, 9-Dec-85 03:11:41 EST
References: <9124@ritcv.UUCP>
Distribution: net
Organization: The Johns Hopkins University
Lines: 21

> 
> []
> 
> I have an Apple ][+ with a Videx Videoterm 80 column card. The card works
> fine with Pascal and from BASIC with a PR#3 command, but Applewriter refuses
> to acknowledge it. Applewriter is written to pick up an 80col card in slot 3.
> The Applewriter manual lists many recommended cards, to be placed in slot 3,
> which will give word processing in 80 columns.
You need to buy an Applewriter pre-boot disk from Videx (~$25).  This is the 
only easy way to run applewriter on a Videoterm (or Ultraterm).

-- 
______________________________________________________________________________

Earle A. Sugar
Disclaimer:"I doubt anyone else here agrees with me."
          USENET: ...!seismo!umcp-cs!aplvax!aplcen!jhunix!ins_aeas
          CSNET:ins_aeas@jhunix.csnet
          ARPA:ins_aeas%jhunix.csnet@csnet-relay.arpa
	  BITNET: INS_BEAS@JHUVMS (as a last resort)
	  or call 301-889-0815 after 6 P.M. EST