Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!petrus!bellcore!decvax!decwrl!ucbvax!info-atari
From: ekijak@ARDC.ARPA ("Edmund S. Kijak", POINT)
Newsgroups: net.micro.atari
Subject: Re:  Where`s the XL`s gone?
Message-ID: <8512232112.AA23468@ucbvax.berkeley.edu>
Date: Mon, 23-Dec-85 15:54:38 EST
Article-I.D.: ucbvax.8512232112.AA23468
Posted: Mon Dec 23 15:54:38 1985
Date-Received: Wed, 25-Dec-85 01:47:54 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 10

This was supposed to go to usenet@ucbvax.berkeley.edu but was not deliverable.

Anybody know how to change the baud rate on a casette save/load?  My recorder
seems to have a problem running at constant speed and I thought if I could
drop down from the standard 600 baud to 300 (or even 150), I might be able
to get it to work again.  I already tried changing the audio frequency
generators to a lower baud rate (successfully) but as soon as I type
'CSAVE' (or 'LIST "C:"), they go right back to 600 baud again.  Is there some
peek address that can be poked to a lower baud rate that the cassette routines
use?