Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site ut-dillo.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!gatech!ut-sally!ut-ngp!ut-dillo!darin
From: darin@ut-dillo.UUCP (Darin Adler)
Newsgroups: net.micro.mac
Subject: Re: Finder 5.0 and HFS1
Message-ID: <244@ut-dillo.UUCP>
Date: Wed, 11-Dec-85 04:07:27 EST
Article-I.D.: ut-dillo.244
Posted: Wed Dec 11 04:07:27 1985
Date-Received: Fri, 13-Dec-85 07:32:48 EST
References: <631@ttrdc.UUCP>
Organization: UTexas Computation Center, Austin, Texas
Lines: 19

Making HFS work with a hard disk has 3 major steps:

1) Put you hard disk driver into the new System.
2) Boot from the new System and Finder 5.0
3) Choose "Erase Disk" from the Finder to allow HFS to initalize the hard
   disk as a HFS volume.

You got steps 1 and 2, but you missed step 3.

Also, your Driver should respons to control calls #5 and #6, where #5 is a
"Verify" command (just returning noErr is sufficient if you have no need for
a verify) and #6 is a "Format" command (again, returning noErr is
sufficient).

Good Luck!
-- 
Darin Adler	{gatech,harvard,ihnp4,seismo}!ut-sally!ut-dillo!darin

"Such a mass of motion -- do not know where it goes"	P. Gabriel