Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site watmath.UUCP
Path: utzoo!watmath!egisin
From: egisin@watmath.UUCP (Eric Gisin)
Newsgroups: net.periphs
Subject: fuji 160M on dataram s33b smd controller
Message-ID: <461@watmath.UUCP>
Date: Fri, 13-Dec-85 16:01:10 EST
Article-I.D.: watmath.461
Posted: Fri Dec 13 16:01:10 1985
Date-Received: Sat, 14-Dec-85 00:35:41 EST
Distribution: net
Organization: U of Waterloo, Ontario
Lines: 11

I don't have the proper manual for the dataram s33b controller we have,
and am wondering if it will support the fuji 160M drive (10 surfaces)
with dip switch settings or a change of rom.  Or is it possible to
just address the extra cylinders as is? We have rm03-like drives
on the controller now.  I know other controllers understand drive types.

Also, I once tryed reformatting a track with interleaved sectors
on this controller, but I couldn't read it back except sector 0.
Are SMD controllers supposed to support interleaved sectors?

		Eric Gisin, egisin@watmath.uucp, egisin@waterloo.csnet